ПОМОГИТЕ! информации этой нет НИГДЕ!

НАШЕЛ! выкладываю в оригинале

Fuel (Approximate) 20.6 Gallons 78 Liters
Engine Oil with Filter
3.7 Liter Engine (5W-30, API Certified) 5 Qts 4.7 Liters
4.7 Liter Engine (5W-30, API Certified) 6 Qts 5.7 Liters
5.7 Liter Engine (5W-20, API Certified) 7 Qts 6.6 Liters
Cooling System *
3.7 Liter Engine (Mopar Engine Coolant/Antifreeze 5 Year/
100,000 Mile Formula)
9 Qts 10 Liters
4.7 Liter Engine (Mopar Engine Coolant/Antifreeze 5 Year/
100,000 Mile Formula)
14.5 Qts 13.7 Liters
5.7 Liter Engine (Mopar Engine Coolant/Antifreeze 5 Year/
100,000 Mile Formula)
14.5 Qts 13.7 Liters

Engine Coolant Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic
Additive Technology)
Engine Oil (3.7L/4.7L Engines) Use API Certified SAE 5W-30 Engine Oil, meeting the requirements of
DaimlerChrysler Material Standard MS-6395.
Engine Oil (5.7L Engines) Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of
DaimlerChrysler Material Standard MS-6395.
Oil Filter (All Engines) Mopar Oil Filter (P/N 05281090)
Spark Plugs Refer to the Vehicle Emission Control Information label in the engine compartment.
Fuel Selection (3.7L and 4.7L Engines)
87 Octane
Fuel Selection (5.7L Engines) 87 Octane Acceptable - 89 Octane Recommended

Automatic Transmission Mopar ATF+4 Automatic Transmission Fluid
Transfer Case (3.7L Engines) Mopar ATF+4 Automatic Transmission Fluid
Transfer Case (4.7L/5.7L Engines) Mopar NV 247 Transfer Case Lubricant
Axle Differential (Front-Rear) Mopar Synthetic Gear & Axle Lubricant SAE 75W-140 (API-GL5) or
equivalent with friction modifier additive.
Brake Master Cylinder Mopar DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3, SAE
J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended
brake fluids.
Power Steering Reservoir This system requires the use of Mopar Hydraulic System Power Steering
Fluid (P/N 05142893AA) or equivalent, which meets DaimlerChrysler Material
Standard MS-10838.